CanonFans

 找回密碼
 立即註冊
搜索
查看: 1937|回復: 12

1DmkIII有新的硬體修正(Submirror以外)

[複製鏈接]
發表於 2008-2-4 09:30 | 顯示全部樓層 |閱讀模式
February 3, 2008: Canon USA informing VIPs of new EOS-1D Mark III AF fix

Starting on February 1, 2008, Canon USA began informing key photographers and key organizations using the EOS-1D Mark III that engineers at Canon in Japan have developed a new fix for the camera's autofocus, a fix that's in addition to the change in the sub-mirror mechanism and firmware updates introduced in 2007.

In closed door meetings at the PMA 2008 trade show in Las Vegas, at Super Bowl XLII in Phoenix, Arizona and on the phone, by our count it's a minimum of four different professional market reps that have revealed to photographers or managers at seven different sites using the EOS-1D Mark III that a new fix is in the works. In other words, Canon USA reps have been directed by their superiors to begin contacting VIP customers, and to tell those customers that there's good news pending on the EOS-1D Mark III autofocus front.

Details are scant right now. Here's some of what's being said by Canon USA reps:
Canon's autofocus engineers have determined the root cause of the EOS-1D Mark III's warm/sunny autofocus problems. They now know precisely what's wrong, and can completely correct it with the new autofocus solution. The phrase "root cause" or "underlying root cause" seems to be common to most or all of the briefings, suggesting the upcoming solution is meant to go well beyond the improvements introduced with the sub-mirror repair and the algorithm changes rolled into firmware v1.1.3.


Some are being told that the new fix is comprised of both a hardware change and new firmware, others are being told that it's not known yet at Canon USA whether the fix is comprised of hardware, firmware or both. This apparent discrepancy in what reps are saying is probably indicative of how new this information is to them, and how little information they themselves have been given so far by higher ups in the Canon organization. Canon USA reps aren't sharing any other specifics about the nature of the new fix.


VIP customers are not being told when the new fix will come available, or when Canon in the U.S. and elsewhere will begin broadcasting this news more widely, though some have been told that a public announcement will be made.
Historically, whispers like this from reps are followed fairly closely by an official release of information, since such news spreads like wildfire among pro shooters. Particularly when large numbers of them congregate at events like this weekend's Super Bowl. It therefore seems likely that a Canon website posting or press announcement will come sooner rather than later, and that the announcement is likely to contain a bit more about the what and the when of Canon's newest effort to improve EOS-1D Mark III autofocus. The level of detail in any Canon announcement will probably be driven by how far out in the future the new fix's availability is.

That's all we know so far.

評分

參與人數 4參與度 +25 收起 理由
GC_幾米 + 5 很有幫助
thirteenguy + 10 我連貼都懶的貼了 辛苦你了
wmw + 5
klisman + 5

查看全部評分

回復

使用道具 舉報

發表於 2008-2-4 09:31 | 顯示全部樓層
這麼快就要修正了

感謝分享
回復

使用道具 舉報

 樓主| 發表於 2008-2-4 09:39 | 顯示全部樓層
看來這一次找到的真的是root cause
估計Canon會先給那些專業攝影用戶儘快更換這個吧?
回復

使用道具 舉報

發表於 2008-2-4 10:09 | 顯示全部樓層
請問這是只要更新韌體就好?

還是又要召回修理?
回復

使用道具 舉報

發表於 2008-2-4 10:22 | 顯示全部樓層
感謝分享[s:47]
回復

使用道具 舉報

發表於 2008-2-4 10:33 | 顯示全部樓層
偶的1d3不是棄嬰....[s:17]
希望快快修正完畢吧!!!!
回復

使用道具 舉報

 樓主| 發表於 2008-2-4 13:38 | 顯示全部樓層
這次的修正到底是firmware修正還是hardware修正是未知的
回復

使用道具 舉報

發表於 2008-2-4 13:51 | 顯示全部樓層
[s:44] [s:44] [s:44]
回復

使用道具 舉報

發表於 2008-2-4 13:57 | 顯示全部樓層
1D3 一直修正...一直修正

乾脆通通回收.....


重新設計... 順便換掉那片瞎眼的LCD...

改款推出1D3N



再多的後續處理....也無法彌補當初設計與產品測試的草率.... 讓許多Canon用家對於心中專業1D機身的地位....大打折扣



事後一直修正....問題到底有沒有根治???
這樣也不是辦法阿
回復

使用道具 舉報

發表於 2008-2-4 16:33 | 顯示全部樓層
讓許多Canon用家對於心中專業1D機身的地位....大打折扣 +10000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000[s:20] [s:20] [s:20]
回復

使用道具 舉報

 樓主| 發表於 2008-2-5 11:48 | 顯示全部樓層
原帖由 kent106 於 2008-2-4 13:57 發表
1D3 一直修正...一直修正

乾脆通通回收.....


重新設計... 順便換掉那片瞎眼的LCD...

改款推出1D3N



再多的後續處理....也無法彌補當初設計與產品測試的草率.... 讓許多Canon用家對於心中專業1D機身的地位.... ...



我也納悶,按傳統photokina會出現IIIn了...
不過,考慮到那些買了的用戶,修正是必須的,這是客觀事實。
QX9650出現cool bug,總不能讓人們等 Nehalm架構的吧?
回復

使用道具 舉報

發表於 2008-2-5 21:11 | 顯示全部樓層
我的1D3 firmware已經是V1.1.3版,不知是否是已經修正完軟/硬體的版本[s:44]
回復

使用道具 舉報

發表於 2008-2-5 21:16 | 顯示全部樓層
對阿,到底又要修正什麼........[s:52]
回復

使用道具 舉報

您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

小黑屋|手機版|Archiver|CanonFans

GMT+8, 2024-5-10 19:01 , Processed in 0.084478 second(s), 19 queries , Gzip On.

Powered by Discuz! X3.4

© 2001-2023 Discuz! Team.

快速回復 返回頂部 返回列表